Videx DIGITAL GSM DOOR INTERCOM SYSTEM Manual do Utilizador descarregar pdf (Página 24)

PAGE 24 of 40 GSM DOOR INTERCOM TECHNICAL MANUAL VER 2.0.5

PROGRAMMING BY PC

NOTE: PC software kit sold separately (Part No. GSMPRO).

USB DRIVER

IMPORTANT: Before connecting the GSM unit to the PC and before installing the GSM

PC program, first install the driver for the USB adapter which can be found on the supplied

CD in the following folder:-

D:\FT232Driver\CDM20814.exe

Where D is the letter of your CD drive.

SOFTWARE SETUP

Run the setup program (setup.exe) from the CD. Follow the on screen instructions to

complete the setup. Please note, the PC must be Window XP PRO or later and have the

.NET 4 framework installed. (The .NET 4 framework can be found on the CD or will be

downloaded from the internet during install).

After completing the setup, the program will be available from your start menu as Videx

GSM. Before running the program, connect the supplied USB cable between a USB port

on your PC and the GSM unit. Run the program and the following screen should appear:-

When the program loads, it checks all available ports for the GSM unit. If found, the GSM

unit goes online with the PC. From the main screen it is possible to:-

Check signal strength:

Click on update to retrieve the signal strength from the unit. The signal

strength will be between 1 & 31 whereby 31 is excellent and 1 is poor.

A signal strength of at least 10 is required for the system to work

satisfactorily.

Check balance on pay as you go SIM’s:

For this to work you must first store the check string required by the

service provider on the settings page. For example, the string *#1345#

is used by Vodafone to retrieve your current balance. Once this has

been stored and uploaded to the unit, clicking the Check Balance

button will retrieve it.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 39 40

Sem comentários

Videx DIGITAL GSM DOOR INTERCOM SYSTEM Manual do Utilizador Página 24