Videx VANDAL RESISTANT Guia de Resolução de Problemas descarregar pdf (Página 11)

PAGE 11 of 36 VR GSM DOOR INTERCOM TECHNICAL MANUAL VER2.0.0

ART.4800 CODELOCK REPROGRAMMING GUIDE

Enter the

engineer’s

code

Press Enter

RED Light will

illuminate *

Notes:

* If the red light does not illuminate, the engineers code is incorrect. Follow the factory default procedure below.

** On the first loop of the flow chart its relay 1, second loop is relay 2.

FACTORY DEFAULT PROCEDURE

Step 1 Remove the power from the keypad

Step 2 Press and hold the enter button while re-powering the keypad

Step 3 Release the enter button. The factory engineer’s code is restored to 111111 (6 x 1)

Re-Enter the

engineer’s

code

Alternatively enter a

new engineer’s

code (4-8 digits)

Press Enter

Enter relay

code

Relay code (4 – 8

digits) operates the

door or gate. **

Press Enter

Enter relay

time

Press Enter

Two digits (01 – 99 Sec

or 00 for remain open)

doors?

Press Enter

twice to exit

programming

RED Light will

switch off

Repeat steps

for relay 2 &

relay 3

YES

Engineers code

Relay 1 code

Relay 2 code

Relay 3 code

Relay 1 Time

Relay 2 Time

Relay 3 Time

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comentários a estes Manuais

Sem comentários

Videx VANDAL RESISTANT Guia de Resolução de Problemas Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico Videx VANDAL RESISTANT