Videx VX2200 Guia de Resolução de Problemas descarregar pdf (Página 23)

PAGE 23 of 68 VX2200 TECHNICAL MANUAL VER1.5

JUMPERS

Jumpers JP2 and JP3 are used to set the video signal type to either

balanced (Twisted pair) or coax (Composite video)

Jumpers JP4 and JP5 are used to terminate the video end of line. They

should only be in the end of line position on the last 2206N

DIP-SWITCHES

Dip-switches 1 – 4 are used to address the 2206N.

Each 2206N must have a unique address. The

address will be used when programming the main

entrance panels on a system. Dip-switch 5 should

be set to ON if there are no local entrances

connected to the 2206N and set to OFF if there are

local entrances connected to it.

Technical specifications

Working voltage : 13 Vdc +/- 10%

Working Temperature : -10 +50 C°

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 67 68

Sem comentários

Videx VX2200 Guia de Resolução de Problemas Página 23