Videx VX2200 Guia de Resolução de Problemas descarregar pdf (Página 26)

PAGE 26 of 68 VX2200 TECHNICAL MANUAL VER1.5

TRIMMERS

Two POT’s are also located within the concierge. The one to the right of the PCB adjusts the speech balance

towards the apartments and the one to the left adjusts the speech balance towards the doors.

PROGRAMMING

The concierge has two main operational modes (Main and standard).Main mode is only used on systems

which include 2206N devices. Standard mode is used for all other system types. To switch the system into

main mode power up with ‘0’ pressed, to switch to standard mode power up with ‘#’ pressed

Programming can be carried out using the concierge keypad and display as shown in the flowchart below or

via a PC connected to the jack socket on the top edge of the concierge.

NOTES:

PROGRAMMING NOTES

a. The programming (combining the phone ID address and the apartment number) must be the same as

digital door units or must correspond to the call button on the functional units in order to have the correct

flat number on the concierge display.

b. During the programming, the system is off line and no calls will go through;

c. The insertion of incorrect values is indicated by error messages. The unit will wait for a correct input

before moving on.

d. When programming via the PC software the concierge must be in OFF mode. Follow the instructions

supplied with the PC software (Note. Follow the same procedure to program the Concierge as would be

used to program a digital door panel).

TECHNICAL SPECIFICATION

Memory capacity : 998 memory locations

Working voltage : 13 Vdc +/- 10%

Max. absorption : about 350 mA

Working temperature : -10 +50 C°

HOLD DOWN ‘*’ WHILE

POWERING UP THE

CONCIERGE

ENTER MEMORY

LOCATION (1-998)

MEM. LOCATION:xxx

MEM. LOCATION:1

ENTER APT NUMBER

(1 to 6 digits)

FLAT : xxxxxx

NEW : xxxx

FLAT :

NEW : 15

ENTER PHONE ID

(1 to 180)

ID PHONE: xxx

NEW: xxx

ID PHONE:

NEW: 15

PRESS

‘*’

BUTTON

ENTER BLOCK NUMBER

(1 to 15)

2206N N. : xx

NEW : xx

2206N N. :

NEW : 1

PRESS

‘*’

BUTTON

(

)

NOTE 1&2

PRESS

‘*’

BUTTON

FLATS?

YES

PRESS

‘*’

TWICE

SYSTEM READY TO USE

LCD DISPLAY

EXAMPLE

PRESS

‘*’

BUTTON

(

)

NOTE 1

To confirm the same value press ‘*’ twice.

(

)

NOTE 1

(

)

NOTE 1

(

)

NOTE 2

This only appears when the concierge is in main mode.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 67 68

Comentários a estes Manuais

Sem comentários

Videx VX2200 Guia de Resolução de Problemas Página 26

Comentários a estes Manuais

Manuais e produtos relacionados com Sistemas de porteiro eletrónico Videx VX2200